|
 
NO.
NAME
NOTE
     
01-1
Antioxidant 168
01-2
Antioxidant 1010
01-3
Antioxidant 1024
01-4
Antioxidant 1076
01-5
Antioxidant 1098
01-6
Antioxidant 626
01-7
Antioxidant 697
01-8
Antioxidant 702
01-9
Antioxidant 3114
01-10
Antioxidant DLTDP
01-11
Antioxidant DSTDP
01-12
Antioxidant B215
01-13
Antioxidant B225
01-14
Antioxidant 618
     
ANTIOXIDANT JX-168
Chemical Name:  Tris-(2.4-di-t-butylphenyl)- phosphite
Molecular formula
C42H63O3P

Molecular Weight
646
CAS#
31570-04-4
Introduction:  This product is soluble in resin and has the characteristic of low volatile, high heat resisting, pump resisting, implosion and non-discoloration. At present, it is the best processing stabitor in China.
Physical Properties:
Appearance:
White to offwhite powder
Assay:
≥99%
Melting Range:
183-187℃
Acid value:(mg KOH/g)
≤0.3%
Light Transmittance:
425nm≥98%
500nm≥98%
Volatiles:
≤0. 3%
Hydrolyze time:(h)
≥14
游离2.4-二叔丁基苯酚: (%)
≤0.2
Solubility: (At 20g/100ml solvent)
Water Insoluble Acetone 1
Benzene 34 Ethyl Acetate 4
Applications: The product is a kind of high-effective solid phosphite ester antioxidant, which is superior to other phosphite ester in the effective protection of polymers’ color.It is often blended with phenolic principal antioxidant (such as 1010) to prepare com-posite antioxidant  which improves the thermo-stability of polymer processing, thus making it widely applied in PE, PP, PS, PA, PC, ABS and many other polymer materials.
Package: Net 25KGS/two-layer PE bag in carton/drum, or as required
Storage: Because of the low performance on hydrolyzing resistance, protectionfrom moisture and heat is needed.
Period of Validity:  About 2 years 
ANTIOXIDANT JX-1010
Chemical Name:  Pentaerythritol-tetra-[β-(3,5-di-tert-butyl-4-hydroxyphenyl)-propionate]

Molecular formula
C37H108O12

Molecular Weight
1178
CAS#
6683-19-8
Introduction: 
This product is white powder, has not scented tastelessly. Nature is steady. It is apt to dissolve it in such solvents as the benzene, acetone and ester, etc, do not dissolve in water, dissolve in the ethanol a little. It is fine that this product is pollution-free, heat resisting and is able to bear water taking out, compatibility is good. With ANTIOXIDANT JX-168, DLTDP, etc. and by giving play to the cooperative effect, raise the anti-oxidant result.
Physical Properties:
Appearance: White powder
Assay:
≥98%
Melting Range: 110-125℃
Ash:
≤0.1%
Light Transmittance: 425nm≥95%
500nm≥97%
Volatiles:
≤0. 5%
Solubility:  (At 20g/100ml solvent)
Water
<0.01
Acetone
47
Methylene Chloride:
63
Ethylacetate
47
N-Hexane
0.3
Toluene
60
Applications: This product is that a kind of pluralism is obstructed the phenol type and resisted oxygen pharmaceutical, have very good compatibility with most polymer. There is good function of changing color of preventing the light and heat from causing. Used PE, PP, PS, polyamide, polyformaldehyde, ABS resin, PVC, synthetic rubber, etc. in the high polymer material extensively. Used for preventing the hot oxygen of the oil and coating from wearing out too.
Package: Net 25KGS/two-layer PE bag in carton/drum, or as required
Storage: Product this chemical properties steady, have special to be it require. should be dampproof and insulating against heat to store.
ANTIOXIDANT MD-1024
Chemical Name:  N,N’-Bis (3,5-di-butyl-4-hydroxyle-phenyl propionyl)hydrazine

Molecular formula
C34H52N2O4

Molecular Weight
552
CAS#
32687-78-8
Introduction:   White to slightly yellow powder, soluble in methanol and acetone, sparingly soluble in chloroform and ethyl acetate, insoluble in water, The product can exit in two different crystal modification(melting point at 200℃ and 230℃).
Physical Properties:
Appearance:

White crystal powder

Assay:

≥98%

Melting Range:

225-227℃

Ash:

≤0.1%

Volatiles:

≤0. 5%

Applications: This product possesses the double structures of hindered phenol and acyl,and afunction of anti-oxidation and metal deactivation. This product is a kind of metal deactivator, can be used either independently or together with antioxidant. It is applicable to polyethylene, polypropylene, polystyrene, polyamide, polyester, and especially to the antioxidant used in phenolic resin. It is effectively preventing the polymeric substance from self-oxidation caused by transition metal ion (the remains of the catalyst). More efficient if it is added to the polymeric substance used in insulated electric wire and cable .The perfect melting nature makes it easily to mix withand into the substance mentioned above and other polymeric substance system without any dispersing problem. The general dosage is of 0.1-0.5 share.
Package:  Net 40KGS/ drum, or as required
Storage: Product this chemical properties steady, have special to be it require. Should be damp proof and insulating against heat to store.
Period of Validity:  About 2 years
ANTIOXIDANT JX-1076
Chemical Name: Octadecyl β - (3,5-di- tert -butyl-4-hydroxy phenyl)-propionate
Molecular formula
C35H62O3

Molecular Weight
530.87
CAS#
2082-79-3
Introduction:  This product is a nonpollutingnontoxic Antioxidant with good heat-resisting and water-extracting performance.
Physical Properties:
Appearance:
White powder
Assay:
≥98%
Melting Range:
49-54℃
Ash:
≤0.1%
Light Transmittance:
425nm≥96%
500nm≥98%
Volatiles:
≤0. 5%
Solubility: (At 20g/100ml solvent)
Water
<0.01
Acetone
19
Benzene
57
Ethanol
1.5
N-Hexane
32
Methanol
0.6
Applications:  This product is a nonpolluting nontoxic Antioxidant with good heat-resisting and water-extracting performance. Wnameely applied to polyolefine, poly-amnamee,polyester, polyvinyl chlornamee, ABS resin and petroleumproduct, often used with DLTP for promoting the antioxnameative effect.
Package:  Net 25KGS/ carton/drum, or as required
Storage: This product is stable without special demands for storing, but high
temperature and moisture should be avoidance.
Period of Validity:  About 2 years
ANTIOXIDANT JX-1098
Chemical Name: N, N'-bis (3-(3,5-ditertbutyl-4-hydroxphenyl) propionyl)hexanediamine
Molecular formula
C40H64O4N2

Molecular Weight
637
CAS#
23128-74-7
Introduction:  This product is a nonpollutingnontoxic Antioxidant with good heat-resisting and water-extracting performance.
Physical Properties:
Appearance:
White powder
Assay:
≥99%
Melting Range:
155-161℃
Ash:
≤0.1%
Light Transmittance:
425nm≥97%
500nm≥98%
Volatiles:
≤0. 5%
Solubility: (At 20g/100ml solvent)
Water
0.01
Acetone
2.8
Benzene
0.01
Ethanol Acetate
1.2
Applications:  This product is a nonpolluting nontoxic Antioxidant with good heat-resisting and water-extracting performance. Wnameely applied to polyolefine, polyamnamee, polyester, polyvinyl chlornamee, ABS resin and petroleum product, often used with DLTP for promoting the antioxnameative effect.
Package:  Net 25KGS/ carton/drum, or as required
Storage: This product is stable without special demands for storing, but high temper-ature and moisture should be avoidance.
Period of Validity:  About 2 years
ANTIOXIDANT 626
Chemical Name:  Bis(2.4-di-t-butylphenyl) Pentaerythritol Diphosphite
Molecular formula
C33H50O6P2

Molecular Weight
606
CAS#
26741-53-7
Introduction:  The product takes on an appearance of white crystalline powder or grains. The melt point ranges from 160℃ to 180℃. Flash point: 168℃ kindling point: 421℃ stacking density: 0.43g/mL lower limit concentration of dust explosion: 0.12Kg/m3 explosion index: 0.37 soluble in organic solvents like toluene, dichloromethane, and slightly soluble in alcohols but insoluble in water.
Physical Properties:
Appearance: White crystalline powder or grains
Acid value:(mg KOH/g)
≤1.0%
Melting Range:
≥160℃
Volatiles:
≤1.0%
free 2,4-di-tert.-butyl-phenol,: (%)
≤1.0%
Applications: The product is a kind of high-effective solid phosphite ester antioxidant, which is superior to other phosphite ester in the effective protection of polymers’ color. It is often blended with phenolic principal antioxidant (such as AT-10) to prepare composite antioxidant which improves the thermo-stability of polymer processing, thus making it widely applied in PE, PP, PS, PA, PC, ABS and many other polymer materials.
Package: cardboard boxes with plastic liners, net weight: 20Kg / box.
Storage: Because of the low performance on hydrolyzing resistance, protection from moisture and heat is needed.
Period of Validity:  About 6 months  
Antioxidant 697
Chemical name: 2,2’-oxamidobis[ethyl 3-(3,5-di-t-butyl-4-hydroxyphenyl) propionate]
Empirical Formula
C40H60N2O8

Molecular Weight
696.92
CAS#
70331-94-1
Introduction:
White or white powder, melting point 175-177℃,flashing point206℃,kindling point 273℃,stabilization for heat. solubility(g/100gsolvent):Acetone10g,Chloroform 35 g, Hexane 0.03g ,Styrene 5g,Water 0.01g.
Physical Properties:
appearance: White or white powder assay:
≥98%
Melting point: 174-180℃ ash:
≤0.1%
Light Transmittance: 425nm≥97% Volatiles:
≤0. 5%
applications: BNX. MD-1097 is a sterically hindered phenolic antioxidant and metal deactivator. BNX. MD-1097 protects polymers against oxidative degradation and metal
catalyzed degradation during processing and in end-use applications. This antioxidant also provides long term thermal stabilization properties. This phenolic antioxidant is an excellent, non-discoloring, non-staining antioxidant and thermal stabilizer with outstanding metal deactivation properties. Typical end use applications include wire and cable insulation, film and sheet manufacture as well as automotive parts. BNX. MD-1097 will stabilize polypropylene, polyethylene, polystyrene, polyester, EPDM, EVA and ABS. Low volatility ,Strong synergistic effect with phosphites, other phenols and thioesters, Non-staining and non-discoloring,FDA approved for adhesives and polymers
package: 25KG/drum,there is inner plastic bag in drum, or according to the requirement of the customers
storage: stored avoiding of high temperature and humidity.
ANTIOXIDANT 702
Chemical Name:  4,4′Methylene bis(2,6-di-tert-butylphenol)
Molecular formula

C29H44O2

Molecular Weight

424.66

CAS#

118-82-1

Introduction:    The product takes on an appearance of white or canary crystallized powder. It is soluble in organic solvents like ethanol, acetate butyrin, gasoline, toluene, dichloromethane, slightly soluble in methanol and ethanol, and insoluble in water and 10% sodium hydroxide solution. Its color gradually gets darker when exposed to air for a long time. Melting point: 149—154℃ stacking specific gravity: 0.5-0.6 g/cm3. With stable chemical properties, the product is combustible but not flammable, and has little odor under normal temperature.
Physical Properties:
Appearance:

White or canary crystallized powder

Assay:

≥98%

Melting Range:

149~154℃

Ash:

≤0.1%

Volatiles:

≤0. 3%

 Applications:  The product is an important phenolic antioxidant, which is mainly used for plastics, natural and synthetic rubber, and usually used as oils additives. With the excellent performance on high-temperature antioxidation, it finds many applications in oil products serving under high temperature like heat conduction oil, quench oil and special lubricant. Package:  Net 25KGS/two-layer PE bag in carton/drum, or as required
Storage:  With stable chemical properties, no special requirements are needed for storage but protection from moisture and heat.  
ANTIOXIDANT  3114
Chemical Name:  1,3,5,Tris(3,5-di-tert-butyl-4-hydrox benzyl)-s-triazine-2,4,6-(1H,3H,5H)trione
Molecular formula
C48H69N3O6

Molecular Weight
784.1
CAS#
27676-62-6
Introduction: 
The product is soluble in solvents like acetone, chloroform and amide, and insoluble in alkane and alcohols. Flash point (open-cup): 289.4℃ kindling point: 302℃ Physical Properties:
Appearance: White crystalline powder Assay:
≥98%
Melting Range: 218℃~224℃ Ash:
≤0.006%
Light Transmittance: 425nm≥95%
500nm≥97%
Volatiles:
≤0. 1%
Applications:
The product is a kind of tri-function group phenolic antioxidant, without pollution and coloring up. Dependent on high molecular weight and melting point, it has low volatility, low transferring, and good water extraction resistance, while equips plastics with resistance to thermo-oxidation and light-oxidation. AT-3114 suits for PE, PP, PS, ABS, nylon, PVC, PU, cellulose and synthetic rubber, especially effective for polyolefin. When used with UV absorbent and phosphite ester, a synergistic effect can be reached, thus enhancing the thermo-stability and light stability.
Package:  Net 25KGS/two-layer PE bag in carton/drum, or as required
Storage:
With stable chemical properties, no special requirements are needed for storage but protection from moisture and heat.
ANTIOXIDANT DLTDP
Chemical Name:    Dilauryl thiodipropionate
Molecular formula
C30H58O4s
S (CH2CH2COOC12H25)2
Molecular Weight
514.86
CAS#
123-28-4
Introduction: 
This product is white, crystalline powder; Insoluble in water soluble in benzene, acetone and alcohol.
Physical Properties:
Appearance: white,crystalline powder IRON: ≤3ppm
heating: ≤0.05%(wt) Ash: ≤0.01%(wt)
acid value:
molten colour:
≤0.05 mgKOH/g
≤60(Pt-Co)
crystallizing point: 39.5-41.5℃
Applications:
DLTDP is a good auxiliary antioxidant and is widely used in polypropylene, polyehylene, polyvinyl chloride, ABS rubber and lubricating oil. It can be used in combination with phenolic antioxidants to produce synergistic effect, and to prolong the life of the final products. Package: Net 25KGS/ drum, or as required
Storage:
DLTDP should be stored in a cool, dry and ventilated place and be kept away from moisture and heat.
Period of Validity:  About 2 years
ANTIOXIDANT DSTDP
Chemical Name:    Distearyl thiodipropionate
Molecular formula

C42H82O4s

S (CH2CH2COOC18H37)2

Molecular Weight

683.18

CAS#

693-36-7

Introduction: 
This product is white, crystalline powder, insoluble in water, soluble in benzene and toluene.
Physical Properties:
Appearance: white, crystalline powder saponificating value: 160-170 mgKOH/g
heating: ≤0.05%(wt) Ash: ≤0.01%(wt)
acid value:
molten colour:
≤0.05 mgKOH/g
≤60(Pt-Co)
crystallizing point: 63.5-68.5℃
Applications:
DSTDP is a good auxiliary antioxidant and is widely used in polypropylene, polyethylene, polyvinyl chloride, ABS rubber and lubricating oil. It has high-melting and low- volatility .It can be used in combination with phenolic antioxidants and ultraviolet absorbers to produce synergistic effect..
Package:
 Net 25KGS/ drum, or as required
Storage:

DSTDP should be stored in a cool, dry and ventilated place and be kept away from moisture and heat.
Period of Validity:  About 2 years
ANTIOXIDANT B215
Chemical Name:    ANTIOXIDANT 215
Chemical name:  Antioxidant 215 is a kind of compound components, including antioxidant 1010 and antioxidant 168. Soluble in benzene, hexane, ethyl acetate, insoluble in water.
C.A.S.NO.:  antioxidant 1010 [6683-19-8]
       antioxidant 168 [31570-04-4]
Specification:
Uses: It, with good synergistic of antioxidant 1010 and 168, can retard heated degradation and oxidative degradation of polymeric substances during processing and in end applications. It can be widely used for PE, PP, PC, ABS resin and other petro-products. The amount to be used may be 0.1%~0.8%.
Package and Storage: Packed with plastic bag , Net 25kg , or according to customers’ requirements. Store in a cool area designed for the storage of chemicals. Period of Validity: Normally 6 months.
ANTIOXIDANT B225

Chemical Name:    ANTIOXIDANT 225
Chemical name:  Antioxidant 225 is a kind of compound components, including antioxidant 1010 and antioxidant 168. Soluble in benzene, hexane, ethyl acetate, insoluble in water.
C.A.S.NO.:  antioxidant 1010 [6683-19-8]
       antioxidant 168 [31570-04-4]
Specification:

Uses:
 It, with good synergistic of antioxidant 1010 and 168, can retard heated degradation and oxidative degradation of polymeric substances during processing and in end applications .It can be widely used for PE ,PP,PC , ABS resin and other petro-products .The amount to be used may be 0.1%~0.8%.
Package and Storage: Packed with plastic bag , Net 25kg , or according to customers’ requirements. Store in a cool area designed for the storage of chemicals. Period of Validity: Normally 6 months.

ANTIOXIDANT 618
Chemical nameSecond stearin - pentaerythritol the phosphite
Molecular formula

C41H82O6P2

Molecular Weight

733

CAS#

3806-34-6

Physical Properties:
Appearance:

White Flake

Heat loss

0.30max

Melting point 55.0min Acid value: (mg KOH/g) 0.5max
Phosphorus content

7.30~8.20

 

 

UseThe drug is a new phosphorus-assisted heat antioxidant, and    its high content of available phosphorus, hydrogen peroxide decomposition strong, and has excellent early coloring, transparent and efficient mobility. Mainly used for PE, PS, PP, ABS, PC, PVC, ethylene - vinyl acetate copolymer. The materials do not dissolve in water, its adding 3 percent to 5 percent, the flash point of 260 ° C.
Packaging and Storage and Transportation
The hardware used for PE bags lined cardboard box and a net weight: 20 kg / bins. The Goods is non-toxic products, according to the general transport chemicals.